HEAD DRAWINGS

Okay, here ya' go, as promised: Basic VW cylinder head. The one to the left is your basic three-view. Keep in mind, you are looking at ILLUSTRATIONS rather than DRAWINGS. If these were DRAWINGS they would be in DeltaCAD's native format, file code .dc This is worth mentioning because as a DRAWING the heads are reasonably accurate, diminsion-wise, allowing you to move things around.

The last of the three will give you some idea of the 'Fat Fin' modification. The green line shows were extensions were welded to the existing fins.


As a point of interest, take a look at the DATES on the drawings. That's when the DRAWING was made. The 'Fat Fin' mod goes all the way back to the mid-1970's.











-R.S.Hoover